Hastelloy B2 Plate Suppliers in India

Leading Manufacturer & Exporter of Hastelloy B2 Coils, Hastelloy Alloy B2 Plate, ASTM B333 UNS N10665 Plate, Hastelloy B2 Cold Rolled Plates, Alloy B2 Polished Plate, Hastelloy B2 Shim Sheet.

Table Of Content

• Hastelloy B2 Sheet Specifications
• Types of Hastelloy B2 Plates
• Hastelloy B2 Plate Thickness
• Hastelloy Alloy B2 Plate Weight

• Hastelloy B2 Sheet Thickness
• Alloy B2 Sheet Applications
• Hastelloy B2 Sheet Compositions
• Alloy B2 Sheet Weight Calculator

We are well reputed stockist of DIN 2.4617 Plate, ASME SB333 UNS N10665 Sheets, Hastelloy B2 Cold Rolled Plate, Hastelloy B2 Clad Plate, Hastelloy B2 Rolling Sheets, Hastelloy B2 Strips, Hastelloy Alloy B2 Annealed Strip and Hastelloy B2 Flat Sheet.

Aakash Steel is a notable manufacturer, exporter and supplier of Hastelloy B2 Plates in India. Hastelloy Alloy B2 Sheets made by nickel-molybdenum alloy, solid solution strengthened, with significant resistance to reducing environments like hydrogen chloride gas, and sulfuric, phosphoric acids, and acetic. Alloy B2 Sheet provides excellent resistance to hydrochloric acid at all concentrations and temperatures.

Our offered Hastelloy B2 Sheets has excellent resistance to pitting, stress corrosion cracking and to knife-line and heat-affected zone attack. Hastelloy B2 Coils provide resistance to pure sulfuric acid and a number of non-oxidizing acids. ASTM B333 UNS N010665 Plate has poor corrosion resistance to oxidizing environments, therefore, it is not recommended for use in oxidizing media or in the presence of ferric or cupric salts because they may cause rapid premature corrosion failure. 

Alloy B2 Plates failure can occur if used where copper or iron is present in a system containing hydrochloric acid. We are also well known as Hastelloy B2 Sheet Suppliers and Hastelloy B2 Plate Suppliers. WNR 2.4617 Sheets have greater structural stability and this in turn leads to lesser concerns during fabrication, service, and welding.

We have huge ready stock of Hastelloy B2 Hot Rolled (HR) Sheet, Hastelloy B2 Coils, Hastelloy B2 Cold Rolled (CR) Plates, Hastelloy B2 Shim Sheet, Hastelloy B2 Plain Sheets, Hastelloy B2 HR Plates, Hastelloy B2 Perforated Sheets & Plates, Hastelloy B2 Galvanized Plates & Sheets in our inventory at best price. Hastelloy Alloy B2 sheet thickness varies and it can also be acquired based on the requirement of the client.Get Hastelloy B2 Plate Price in India.

At the time of manufacturing superior technology, as well as extensive quality control from steelmaking to finishing, assure the stable production of DIN 2.4617 Plate in uniformly of excellent quality. We apply the process of surface finishing to our Hastelloy Alloy B2 Plate by pickling or buff-polishing. Hastelloy Alloy B2 Strips levels of finishing & cut can be adjusted according to customer requirements. Alloy B2 Plate is available in the form of Sheet, Plain Sheet, Shim Sheet, Foils, Coils, Rolls, Strip, Flats, Clad Plate, Rolling Sheet, Flat Shim, Rolling Plate, and Flat Sheet. Hastelloy B2 Plate Weight Calculator allows you to calculate an estimate of the weight of various sizes of Hastelloy Alloy B2 plates based on shape and dimensions.

Hastelloy B2 Plate Specifications

Specifications	ASTM B333 / ASME SB 333
Size	1000 mm x 2010 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2010 mm x 2010 mm, 2010 mm x 2010 mm
Thickness	0.1mm to 12 mm Thk
Form	Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Hastelloy Alloy B2 Plate Types

Hastelloy Alloy B2 Hot Rolled Plate	Hastelloy B2 Cold Drawn Sheet
2B finish Hastelloy B2 sheet	Cut to size Hastelloy B2 plate
Hastelloy B2 Galvanized Sheets	Hastelloy B2 Ring Coils
Cold rolled Hastelloy B2 sheet	Hot rolled Hastelloy B2 plate
2B BA Hairline Mirror finish Hastelloy B2 plates	Brush Hastelloy B2 Plate
Hastelloy WERKSTOFF NR. 2.4617 Foils	Polished Hastelloy B2 Sheet
Perforated Hastelloy B2 Sheet	Hastelloy B2 2B Plate
ASTM B333 UNS N10665 Steel Plate	Hastelloy B2 Cold Rolled Coils
8K Mirror Finish Hastelloy B2 Sheet	Hairline Hastelloy B2 Sheet
No.4 Hastelloy B2 Sheet	Hastelloy B2 Diamond Plate
Thin Hastelloy B2 Sheet	Hastelloy B2 Rolls Sheets
Hastelloy B2 Design Sheet	Hastelloy B2 Expanded Sheet
201 Alloy Shim Sheets	Hastelloy Alloy B2 Sheets
Hastelloy B2 Clad Plate	Hastelloy B2 Strip
Hastelloy B2 Shim Stock	Hastelloy B2 Quarto Plate
Hastelloy B2 Polished Plates	Hastelloy B2 Perforated Sheet
Cut to Size Hastelloy B2 Sheet	Hastelloy B2 Annealed Strip
Bright Annealed Hastelloy B2 Sheet	Hastelloy B2 Corrugated Sheet
Hastelloy B2 HR Sheets	ASTM B333 Hastelloy B2 Sheets
Hastelloy B2 Floor Sheet	Hastelloy B2 Diamond Sheet
Hastelloy B2 Coils	Hastelloy B2 Chequered Plate

Equivalent Grades of Hastelloy B2 Sheet Plate

STANDARD	UNS	WERKSTOFF NR.
Hastelloy B2	N10665	2.4617

Hastelloy B2 Sheet Chemical Composition

Chemical Requirements
	Ni	Mo	Fe	Cr	C	Si	Mn
Max	Bal.	30.0-26.0	2.0	1.0	0.02	0.10	1.0

Alloy B2 Sheet & Plate Mechanical Properties

Grade	Density	Tensile Strength	Yield Strength (0.2%Offset)	Melting Point	Elongation
Hastelloy B2	9.2 g/cm3	Psi – 1,10,000 , MPa – 760	Psi – 51000 , MPa – 350	1370 °C (2500 ºF )	40 %

Hastelloy B2 Sheet Thickness

Thickness
0.050 inches 1.27 mm
0.060 inches 1.524 mm
0.062 inches 1.5748 mm
0.074 inches 1.8796 mm
0.104 inches 2.6416 mm
0.093 inches 2.3622 mm
0.125 inches 3.1750 mm
0.134 inches 3.4036 mm

Hastelloy B2 Plate Thickness

Alloy B2 PLATE METRIC DIMENSIONS
SURFACE FINISH	THICKNESS (MM)	WIDTH (MM)
2B – Cold rolled, heat treated, pickled, skin passed	0.25–8.0	max. 2032
2D – Cold rolled, heat treated, pickled	0.4–6.35	max. 1524
2E – Cold rolled, heat treated, mechanically descaled	0.4–8.0	max. 2032
2R – Cold rolled, bright annealed	0.25–3.5	max. 1524
2H – Work hardened	0.4–6.35	max. 1524
Polished, brushed	0.5–4.0	max. 1524

Hastelloy B2 Plates Imperial Dimensions

Width (in)	Surface finish	Gauge (in)
max. 72*	2B – Cold rolled, heat treated, pickled, skin passed	10–24
max. 60	2D – Cold rolled, heat treated, pickled	12–24
max. 48	BA Mexinox only	18–28
max. 60	Polished (not brushed)	11–24
max. 48	Temper rolled Mexinox only	13–29

Weight of Hastelloy B2 Plate

Density: 9.2 g/cm³
Thickness	Thickness	Plate Weight Per Unit Area
3/16 inches	0.1875 inches 4.75 mm	0.0639 lbs/in² 44.92614744 kg/m²
1/4 inches	0.25 inches 6.3500 mm	0.0855 lbs/in² 60.1124508 kg/m²
3/8 inches	0.375 inches 9.52 mm	0.127 lbs/in² 89.2898392 kg/m²
1/2 inches	0.500 inches 12.7 mm	0.17 lbs/in² 119.521832 kg/m²
5/8 inches	0.625 inches 15.87 mm	0.206 lbs/in² 144.8323376 kg/m²
3/4 inches	0.750 inches 19.05 mm	0.247 lbs/in² 173.6581912 kg/m²
7/8 inches	0.875 inches 22.22 mm	0.288 lbs/in² 202.4840448 kg/m²
1 inches	1.000 inches 25.4 mm	0.329 lbs/in² 231.3098984 kg/m²
1 1/4 inches	1.250 inches 31.75 mm	0.412 lbs/in² 289.6646752 kg/m²
1 1/2 inches	1.500 inches 38.1 mm	0.495 lbs/in² 348.019452 kg/m²
1 3/4 inches	1.750 inches 44.45 mm	0.577 lbs/in² 405.6711592 kg/m²
2 inches	2.000 inches 50.8 mm	0.66 lbs/in² 464.025936 kg/m²
2 1/4 inches	2.250 inches 57.15 mm	0.736 lbs/in² 517.4592256 kg/m²
2 1/2 inches	2.500 inches 63.5 mm	0.818 lbs/in² 575.1109328 kg/m²
2 3/4 inches	2.75 inches 69.85 mm	0.899 lbs/in² 632.0595704 kg/m²
3 inches	3.000 inches 76.2 mm	0.982 lbs/in² 690.4143472 kg/m²

Prime Countries Where We Supply & Export Hastelloy Alloy B2 Sheets & Plates

Afghanistan	Algeria	Angola
Argentina	Australia	Austria
Azerbaijan	Bahrain	Bangladesh
Belarus	Belgium	Bhutan
Bolivia	Brazil	Bulgaria
Canada	Chile	China
Colombia	Costa Rica	Croatia
Czech Republic

ASTM B333 Hastelloy B2 Sheets Used in

After inspection care is taken towards packing of the products, before dispatching Hastelloy B2 plate, Alloy B2 Sheets, and Hastelloy Alloy B2 Coils went through strict quality tests and delivered to their respective customers worldwide. We focus on every procedure to assure quality of Alloy B2 Coils. We offers just about everything to meet your B2 Alloy Sheets, Alloy B2 Plates, and Alloy B2 Coils pack requirements to industry.

Single Product Page Location Tabs